Gypcrete Surface Preparation:  

All wood subfloors must be structurally sound, thoroughly clean (use vacuum or broom), dry, and free from mud, wax, grease, oil and other contaminants and fill cracks with a crack filler. Gypcrete will not correct or compensate for a structurally defective substrate. If there is any movement in your wood floor that may cause concern about bonding of the Gypcrete to the subfloor material, staple 2.5 pound metal lath to floor as reinforcement prior to pouring Gypcrete.

You can do your own small square footage Gypcrete Repair.

Go to http://floormike.net

Mouse over the Gypsum Underlayment tab

Click on the Gypcrete Repair tab

Click on Mixing Instructions tab

Click on Yield and Pricing tab to determine how much product you need

Call “floormike” to order –

800-247-5266, ext 104 or 704-596-6816, ext 104

or email toney@maxxonse.com

You can do your own small square footage Gypcrete Repair.

Go to http://floormike.net

Mouse over the Gypsum Underlayment tab

Click on the Gypcrete Repair tab

Click on Mixing Instructions tab

Click on Yield and Pricing tab to determine how much product you need

Call “floormike” to order –

800-247-5266, ext 104 or 704-596-6816, ext 104

or email toney@maxxonse.com

You can do your own small square footage Gypcrete Repair.

Go to http://floormike.net

Mouse over the Gypsum Underlayment tab

Click on the Gypcrete Repair tab

Click on Mixing Instructions tab

Click on Yield and Pricing tab to determine how much product you need

Call “floormike” to order –

800-247-5266, ext 104 or 704-596-6816, ext 104

or email toney@maxxonse.com